2Department of Mechanical Engineering, İzmir Institute of Technology, İzmir, 35430, Türkiye
Abstract
Since the industry recognizes material surface properties as an important criterion, selecting appropriate laser settings with minimal trial and error, low cost, and high reliability to achieve the desired surface finish is important. Therefore, the Taguchi analysis is an effective method for evaluating the laser parameters affects. In this research, the influence of laser processing conditions on the wettability behavior of 1.2379 cold work tool steel induced by Ytterbium fiber laser treatment were investigated. The laser power, scan speed and repetition rate were varied to determine the optimal settings to maximize the contact angle. A Taguchi L9 experimental design was employed, and the signal-to-noise ratios were calculated. The ANOVA results revealed contributions of 50.31% for the scan speed, 38.86% for laser power, and 11.24% for the repetition rate. The regression analysis equation, with an R2 of 0.98, predicted a maximum contact angle of 96.274°, indicating a hydrophobic surface. The results indicate that the Taguchi method effectively identifies the optimum laser parameters for the desired surface properties with high confidence and minimal experimentation. The originality of this study is associated with the systematic application of statistical experimental design and variance analysis laser surface modification of 1.2379 tool steel for controlling its surface wettability.