ISSN: 1304-7191 | E-ISSN: 1304-7205
Experimental investigation of R600a refrigerant flow inside adiabatic capillary tube
1Heat and Thermodynamics Division, Department of Mechanical Engineering, Yildiz Technical University, Besiktas-ISTANBUL
Sigma J Eng Nat Sci 2016; 34(2): 241-252
Full Text PDF

Abstract

Capillary tubes are often used as an expansion component in the refrigeration systems of household refrigerators. During the flow of the refrigerant inside the capillary tube, due to pressure loss of the refrigerant, the refrigerant starts boiling and towards the end of the capillary tube, different types of twophase
regimes occur. Therefore; the refrigerant flow inside the capillary tube is a complex phenomenon and there are many experimental and numerical studies analyzing this refrigerant flow. However; in literature
there are hardly any experimental studies analyzing refrigerant flow in small scale refrigeration systems using isobutane (R600a) as the refrigerant. In this study, the two-phase flow regimes of the R600a refrigerant inside
a vertical adiabatic capillary tube with 0.80 mm inner diameter, under different condensation pressures subcooling degrees and capillary tube lengths, are recorded via high-speed camera; and the effects of different parameters on refrigerant mass flow are analyzed. The boundary conditions for the condensation pressure, subcooling degree and capillary tube length are determined in accordance with a small scale refrigeration system.